# How do I estimate the water footprint of AI?

> Estimate AI water use from energy and a data centre's water usage effectiveness, add water used in generating the power, and say where it was used.

Source: https://greenai.guide/how-do-i/estimate-the-water-footprint-of-ai/  
Updated: 2026-11-19

## In short

Water use follows energy use: multiply the energy of your AI work by the data centre's water usage effectiveness (WUE) for on-site cooling, and add the water used to generate the electricity if it is in your boundary. Published per-prompt figures range from a fraction of a millilitre to tens of millilitres, mostly because they count different things. Where the water is used matters as much as how much.

## Steps

1. Estimate the energy of the AI work first, in kilowatt-hours.
2. Multiply by the data centre's WUE, in litres per kilowatt-hour, for on-site water.
3. Add off-site water used in electricity generation if your boundary includes it.
4. Note the location, and whether the region is short of water.
5. State the boundary and give a range rather than a single figure.

**Estimate water from energy, then say where it was used.** Data centres use water mainly for cooling, and power
stations use water to generate the electricity, so both sit behind an AI answer.

## How big are the published figures?

| Source | What it measured | Water |
|---|---|---|
| Google (2025) | Median Gemini text prompt | 0.26 mL |
| Mistral AI life-cycle assessment (2025) | A 400-token response, counting more stages | 45 mL |
| Li, Yang, Islam and Ren | Training GPT-3 in Microsoft's US data centres | about 700,000 litres directly evaporated |

Li and colleagues also estimated that GPT-3 needs to "drink" a 500 mL bottle of water for roughly 10 to 50
medium-length responses, depending on when and where it runs, and projected global AI demand could account for 4.2
to 6.6 billion cubic metres of water withdrawal in 2027. These are estimates for one older model and set of data
centres. Newer company figures, such as Google's, are much lower; compare what each counts before drawing conclusions.

## What goes into an estimate?

- **On-site water:** energy × [WUE](/glossary/#wue). See [making sense of PUE and WUE](/how-do-i/understand-pue-and-wue/).
- **Off-site water:** the water used per kilowatt-hour by the local power stations.
- **Manufacturing:** chip making uses water too, if your boundary is wide.

## Common mistakes

- **Mixing withdrawal and consumption.** Water taken and returned is not the same as water evaporated.
- **Ignoring location.** A litre in a drought-hit region matters more than one where water is plentiful.
- **Comparing figures with different boundaries,** as in the table above.

To cut water use, see [reducing the water footprint of AI](/how-do-i/reduce-the-water-footprint-of-ai/) and
[hosting and data centres](/practice/hosting-and-data-centres/).

## Sources

- [Making AI less 'thirsty': uncovering and addressing the secret water footprint of AI models](https://arxiv.org/abs/2304.03271), Li, Yang, Islam and Ren (2023)
- [Measuring the environmental impact of delivering AI at Google scale](https://arxiv.org/abs/2508.15734), Elsworth et al., Google (2025)
- [Our contribution to a global environmental standard for AI](https://mistral.ai/news/our-contribution-to-a-global-environmental-standard-for-ai), Mistral AI (2025)
